SnapStar

FINALLY ENDING THE PAIN of lubricating

The new grease coupler is safe, clean and convenient. SnapStar is the name of the new super coupler for standard hydraulic grease nipples from UMETA. It scores with many advantages and lubrication is done in no time without getting your fingers dirty. High pressures are involved in the lubrication process. That is why safety is so important. Both user and equipment must be protected in the best possible way. SnapStar achieves this with a bomb-proof fit, tested tightness up to 1.000 bar and foolproof operation.

 

PLUS POINTS ONLY:

  • 4-jaw snap lock, easy to release
    holds firmly and securely
    fits on all hydraulic grease nipples
    saves grease, time, money and trouble
    4 year functional warranty
    tested: tight up to 1.000 bar
    durable industrial quality
    connection thread M 10×1 or G 1/8 (1/8“ NPT – for America)
    available with valve for pressure relief
    small diameter – can be used in confined spaces without any problems

You are here

SnapStar ​

SnapStar

Connection threadLength (in mm)Weigth (in g)ø(in mm)Sales No:
M 10×175117front 15,5 | center 20,00 | rear 16,509626881
G 1/875117front 15,5 | center 20,00 | rear 16,509626883

 

 

 

 

Connection threadLength (in mm)Weigth (in g)ø(in mm)Sales No:
M 10×15378front 15,5 | center 20,00 | rear 15,009626880
G 1/85378front 15,5 | cener 20,00 | rear 15,00
 

UMETA TWIN-LOCK system – The life insurance for your machines and equipment

When maintaining your high quality machines and equipment, you should absolutely avoid quasi-lubrication!

 

What does quasi-lubrication mean?

Upon continuous operation, abrasion can easily take place between the metal piston and the metal cylinder of the grease gun. For this reason, the grease at the top of the piston can be pressed back into the cartridge at a low operating pressure without being noticed. In spite of all effort, no grease will be transported to the lubrication spot. In order not to expose your machines to this risk, we developed the UMETA TWIN-LOCK system.

In connection with two special sealing elements, it protects the precision piston from wear upon continuous operation. By the special arrangement of the sealing elements, the UMETA TWIN-LOCK system avoids quasi-lubrication and grease escaping the piston. The sealing elements are designed in a way that they adjust themselves to the corresponding operating pressure with respect to their sealing effect.

UMETA EVER-FLOW SYSTEM

The EVER-FLOW system invented by UMETA ensures perfetct functioning of the UMETA TWIN-LOCK gun, even with thick grease and at the lowest temperatures.

This is ensured by an outlet valve equipped with a special ball stopper. Even semifluid biological grease will easily be transported by the vacuum developing during the pumping process.

This is another advantage of UMETA’s, where many other competitors’ products fail.

UMETA

AND EVERYTHING RUNS SMOOTH

NEWS

FOLGEN SIE UNS

Kontakt

Tel.: +49 (0)521 948-0

eMail.: info@umeta.com

® UMETA HERMANN ULRICHSKÖTTER METALLWARENFABRIK GMBH & GO. KG

Technische Umsetzung by ByteCrafter | S.Faust