75/PKI Zinc

Injection gun

  • for 550 ccm filling material
  • with orange polyamide cap

You are here

Injection gun

75/PKI Zinc

Injection gun

barrel version made of zinc-plated steel
  Ø 56 mm
barrel length 296 mm
suitable for resin
filling capacity 550 ccm (17.5 Oz.) bulk grease
connection thread M 10 x 1 or G 1/8
upon request 1/8 NPT
operating pressure 400 bar / 5,800 PSI
output approx. 1.9 ccm (0.06 Oz.) /stroke
testing pressure 800 bar / 11,600 PSI
packed in polybag
weight 960 g
  + accessories and packaging
dimensions (LxW xH) 356 x 125 x 67.5 mm
Connection Packaging Scope of delivery Ref. No.:
M 10 x 1 polybag without accessories V000334
G 1/8 polybag without accessories V001440

UMETA TWIN-LOCK system – The life insurance for your machines and equipment

When maintaining your high quality machines and equipment, you should absolutely avoid quasi-lubrication!

 

What does quasi-lubrication mean?

Upon continuous operation, abrasion can easily take place between the metal piston and the metal cylinder of the grease gun. For this reason, the grease at the top of the piston can be pressed back into the cartridge at a low operating pressure without being noticed. In spite of all effort, no grease will be transported to the lubrication spot. In order not to expose your machines to this risk, we developed the UMETA TWIN-LOCK system.

In connection with two special sealing elements, it protects the precision piston from wear upon continuous operation. By the special arrangement of the sealing elements, the UMETA TWIN-LOCK system avoids quasi-lubrication and grease escaping the piston. The sealing elements are designed in a way that they adjust themselves to the corresponding operating pressure with respect to their sealing effect.

UMETA EVER-FLOW SYSTEM

The EVER-FLOW system invented by UMETA ensures perfetct functioning of the UMETA TWIN-LOCK gun, even with thick grease and at the lowest temperatures.

This is ensured by an outlet valve equipped with a special ball stopper. Even semifluid biological grease will easily be transported by the vacuum developing during the pumping process.

This is another advantage of UMETA’s, where many other competitors’ products fail.

UMETA

AND EVERYTHING RUNS SMOOTH

NEWS

FOLGEN SIE UNS

Kontakt

Tel.: +49 (0)521 948-0

eMail.: info@umeta.com

® UMETA HERMANN ULRICHSKÖTTER METALLWARENFABRIK GMBH & GO. KG

Technische Umsetzung by ByteCrafter | S.Faust