Handlever Oil Barrel Pump (steel tube)

  • with telescopic tube and steel discharge elbow
  • for 60/200/220 ltr. drums
  • suitable for motor, hydraulic, and gear oil, diesel, petroleum, heating oil, waste oil

You are here

Handlever Oil Barrel Pump (steel tube)

Handlever Oil Barrel Pump (steel tube)

suitable formotor, hydraulic, and
 gear oils up to SAE 50
tube typemade of zinc-plated steel
length/dip depth440 – 860 mm
tube ØØ 25 – 35 mm
drum thread2″
output16 ltr./min.
 300 ccm (10.1 oz.)/stroke
total height1,250 mm
total width520 mm
net weight1,800 g
packed incardboard box
gross weight1,900 g
dimensions (L x W x H)460 x 140 x 70 mm
PackagingRef. No.:
cardboard box9626830

UMETA TWIN-LOCK system – The life insurance for your machines and equipment

When maintaining your high quality machines and equipment, you should absolutely avoid quasi-lubrication!

 

What does quasi-lubrication mean?

Upon continuous operation, abrasion can easily take place between the metal piston and the metal cylinder of the grease gun. For this reason, the grease at the top of the piston can be pressed back into the cartridge at a low operating pressure without being noticed. In spite of all effort, no grease will be transported to the lubrication spot. In order not to expose your machines to this risk, we developed the UMETA TWIN-LOCK system.

In connection with two special sealing elements, it protects the precision piston from wear upon continuous operation. By the special arrangement of the sealing elements, the UMETA TWIN-LOCK system avoids quasi-lubrication and grease escaping the piston. The sealing elements are designed in a way that they adjust themselves to the corresponding operating pressure with respect to their sealing effect.

UMETA EVER-FLOW SYSTEM

The EVER-FLOW system invented by UMETA ensures perfetct functioning of the UMETA TWIN-LOCK gun, even with thick grease and at the lowest temperatures.

This is ensured by an outlet valve equipped with a special ball stopper. Even semifluid biological grease will easily be transported by the vacuum developing during the pumping process.

This is another advantage of UMETA’s, where many other competitors’ products fail.

UMETA

AND EVERYTHING RUNS SMOOTH

NEWS

FOLGEN SIE UNS

Kontakt

Tel.: +49 (0)521 948-0

eMail.: info@umeta.com

® UMETA HERMANN ULRICHSKÖTTER METALLWARENFABRIK GMBH & GO. KG

Technische Umsetzung by ByteCrafter | S.Faust